Ricable - Dedalus Elite Speaker Jumper Cable

DEDALUS BRIDGE - Set 4 pcs. Hi-End Jumpers for Hi-Fi Acoustic Speakers

The importance of jumpers bridge.

Often high-end loudspeakers are equipped with 4 terminals for connection, because they offer the possibility of Bi-Wiring or Bi-Amping. If not used in such configurations, the "High Level" terminals should be connected to the "Low Level" terminals. All loudspeaker manufacturers supply jumpers, which are usually a poor quality brass plate. This situation has enormous disadvantages in reproduction, because the signal Speaker is not transmitted with the same purity as from the amplifier, when using quality Speaker Cables. To remedy this situation and achieve maximum sound performance, simply replace the supplied jumpers with Ricable Dedalus Bridge . This will put your system in the best possible playing condition.

Dedalus Bridge is produced with either the Dedalus Speaker MKII (DPB/DPF) or the Dedalus Speaker Elite (EPB/EPF) conductors in 16 cm lengths and is terminated with spades/spades or spades/banane. The Ricable Dedalus Bridge jumpers are designed to work best with our Dedalus and Magnus series cables, but are also suitable for lesser Speaker cables.

Quality Dedalus Elite for your loudspeakers.

MARC conductor70% compared to OFC: 6.4 mm² conductors made of copper 7N MARC (Multicore Annealed Ricable Conductor) with 0.1 mm strands with a smoother and more compact surface allow 70% better audio transmission than OFC copper.

COMPROMISE-FREE CONSTRUCTION: Twisted Geometry with 750 strands (DPF/DPB) and Hexaphonic with 784 strands (EPF/EPB) per polymer-insulated conductor that drastically improves the audio signal.

MADE BYHAND IN ITALY by RICABLE: Every step of the production process is carried out entirely by hand and the checks on every single piece are maniacal, with the use of new tools and testing procedures, but above all with the help of meticulous human control. From the union of Technology and Italian Craftsmanship, the cables Dedalus Made in Italy are born.

FORALL NEEDS: The Dedalus Bridge jumpers are available in four versions, two with conductor Dedalus Speaker MKII and two with conductor Dedalus Elite Speaker. The Forks are made of pure Copper while the Banana are made of Copper/Tellurium. The high flexibility and the 16 cm length allow them to be used in all acoustic loudspeakers, both when the terminals are very close to each other and when they have large distances. The double-overhang spades accepts all types of clamps with diameters up to 8 mm.